Agricultural Kit Building including steelwork, purlins, roof cladding, roof lights, rainwater goods, gable ends & sides.
To supply for erection on prepared site and concrete foundations, steel portal frame 6.096m (20`) centres with 254 x 146 x 31kg UB stanchions with web stiffeners and 254 x 146 x 31kg UB rafters with rafter stays.
Both gable frames to have 3 No. 203 x 133 x 25kg UB intermediate sub stanchions, including CHS rafter bracing to one end bay, complete with CHS eaves ties.
All steelwork will be shotblasted and painted with red semi gloss finish.
To supply 225 x 75 C16 graded tanalised timber purlins bolted to frame at 1.375m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. Ridge to be alternating close fitting and ventilating crown cranked. Verges to be finished with fibre cement barge boards.
Incorporate 40 No. 1.525m corrugated 2.40kg/m² GRP profile 6 rooflights in roof cladding positioned to suit customer’s requirements.
Eaves gutter to be 160 on the side with 2 No. 110mm Ø PVC downpipes to each side. All gutters to be PVC with rubber sealed joints fixed to eaves beams with PVC brackets at 1m intervals and PVC down-pipe clips to stanchions.
Both gable ends to have 150 x 22 tanalised timber Yorkshire boarding down to 2.890m (9`6“) below eaves level on 125 x 75 C16 graded tanalised timber sheeting rails.
One sides to have 150 x 22 tanalised timber Yorkshire boarding down to 2.890m (9`6“) below eaves level on 125 x 75 C16 graded tanalised timber sheeting rails.
These items incur extra charges – your estimator will be able to provide you with pricing.
- 2 No. Doorways to be 3.658m (12`) wide x 3.657m (12`) high, positioned one each end. (No doors)
- 2 No. Doorways to be 4.267m (14`) wide x 3.657m (12`) high, positioned one each end. (No doors)
- Concrete Panels: 90mm thick x 1.500m high to 24` both ends (excluding doorways) and one full side.
Back to all Special Offers