Agricultural Kit Building including steelwork, purlins, roof cladding, roof lights, rainwater goods, end cladding, side cladding & 1 personnel door.
Please note that steel sizes/building specifications may vary depending on the location of your building & its local weather conditions.
To supply for erection on prepared site and concrete foundations, steel portal frame 4.572m (15`) centres with 203 x 133 x 25kg UB stanchions with web stiffeners and 178 x 102 x 19kg UB rafters with rafter stays.
One gable frame to have 1 No. 178 x 102 x 19kg UB intermediate sub stanchion. Other gable frame to have 2 No. 178 x 102 x 19kg UB intermediate sub stanchions, including CHS rafter bracing to one end bay, and CHS eaves ties.
To supply 175 x 75 C16 graded timber tanalised timber purlins bolted to frame at 1.375m centres. Eaves beams to be 225 x 75 tanalised timber.
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. Ridge to be alternating close fitting and ventilating crown cranked. Verges to be finished with fibre cement barge boards.
Incorporate 6 No. 1.525m corrugated 2.40kg/m² GRP profile 6 rooflights in roof cladding positioned to suit customer’s requirements.
Eaves gutter to be 160 on the side with 1 No. 110 mm Ø PVC downpipe to each side. All gutters to be PVC with rubber sealed joints fixed to eaves beams with PVC brackets at 1m intervals and PVC down pipe clips to stanchions.
Both gable ends to be clad down to 3.658m (12`) below eaves level with polyester coated box profile steel sheets on 150 x 75 C16 graded tanalised timber sheeting rails.
Both sides to be clad down to 3.658m (12`) below eaves level with polyester coated box profile steel sheets on 150 x 75 C16 graded tanalised timber sheeting rails.
DOOR AND DOORWAY:
1 No. 880mm wide x 2075 mm high personnel door with a standard grey finish.
1 No. 3.658m (12′) wide x 3.658m (12′) high doorway to one gable end has been allowed for (door not included)
These items incur extra charges – your estimator will be able to provide you with pricing.
- Concrete Panels: 90mm thick x 1m high to both ends and both sides, exluding doorways.
- Manual or Electric Roller Shutter Door: 3.658m (12′) wide x 3.658m (12′), galvanised or coloured.
Back to all Special Offers