Agricultural Kit Building including steelwork, purlins, roof cladding, roof lights, rainwater goods, end cladding & side cladding.
Please note that steel sizes/building specifications may vary depending on the location of your building & its local weather conditions.
To supply for erection on prepared site and concrete foundations, steel portal frame 6.096m (20`) centres with 356 x 171 x 45kg UB stanchions with web stiffeners and 305 x 165 x 40kg UB rafters with rafter stays.
One gable frame to have 2 No. 305 x 165 x 40kg UB intermediate sub stanchions. Other gable frame to have 1 No. 305 x 165 x 40kg UB intermediate sub stanchion, including CHS rafter and side bracing to both end bays, complete with CHS eaves ties.
All steelwork will be shotblasted and painted with a red oxide finish.
To supply 225 x 75 C16 graded tanalised timber purlins bolted to frame at 1.375m centres. Eaves beam to be 225 x 75 C16 graded tanalised timber.
To supply Profile 6 reinforced corrugated natural grey fibre cement sheets. Ridge to be closed. Verges to be finished with fibre cement barge boards. Complete with foam fillers.
Incorporate 12 No. 1.525m corrugated 2.40kg/m² profile 6 roof lights in roof cladding positioned to suit customer’s requirements.
Eaves gutter to be 160 on the side with 2 No. 110mm Ø PVC downpipes to each side. All gutters to be PVC with rubber sealed joints fixed to eaves beams with PVC brackets at 1m intervals and PVC down-pipe clips to stanchions.
Both gable ends to be clad down to 2.591m (8`6”) below eaves level with polyester coated box profile steel sheets on 150 x 75 C16 graded tanalised timber sheeting rails, complete with foam fillers and shedder flashing.
Both sides to be clad down to 2.591m (8`6”) below eaves level with polyester coated box profile steel sheets on 150 x 75 C16 graded tanalised timber sheeting rail, complete with foam fillers and shedder flashing.
These items incur extra charges – your estimator will be able to provide you with pricing.
- Concrete Panels: 140mm thick x 3.000m high to both ends and both sides, excluding doorways.
- 1 No. Roller Shutter Door to be 4.572m (15`) wide x 4.572m (15`) high, manual operation, plain galvanised finish, positioned on one end.
- 1 No. Personnel Door to be 880mm wide x 2075mm high with 10-point locking, positioned on one side.
Back to all Special Offers